Good hygiene and a clean house go hand-in-hand. However, a blocked drain is one of the most common problems in a home. Sewers are usually exposed to raw sewage, tree roots and other organic matter. These can all accumulate in your pipes, making your drains jammed. You might notice that water is backing up or going slower than usual, and this could be because your drain is clogged with debris, such as hair and soap scum. So, this article shares some simple tips and tricks to help you quickly clean your drains and prevent future problems!
Reasons for a Clogged Drain
In case you are dealing with a clogged drain, it is important to understand why this may happen. Sometimes, a simple clog can be cleared with a plunger or snake. However, if the jam is caused by a buildup of oil, hair, or soap scum, it may require the help of a professional plumber.
- Grease is one of the most frequent reasons. When hot grease gets cool and hardens, it can attach to the pipes and create a blockage. Over a period of time, this blockage can become increasingly difficult to remove. And if the buildup in your drain persists, it is best to contact a professional plumber for help.
- Hair is a frequent cause of clogs. When hair sheds from your head, it can go into the pipes. Over time, this can form a ball that eventually blocks the drain. So, you can install a cover on your drains or use a hair catcher in your shower or tub to prevent this.
- Soap scum is also a reason for a blocked drain. This happens when soap mixes with hard water and forms a film inside your pipes. This film can eventually build up and cause a blockage. And in case of hard water in your home, it is important to use an effective soap that will not contribute to soap scum buildup.
Steps to Take To Deal With a Clogged Drain
In the event of a clogged drain, you can take some steps to try and clear it yourself, such as:
- First, pour boiling water into your drains; this will help to loosen any buildup that may be causing your drain to clog.
- If that doesn’t work, you can always use a plunger. You will notice the buildup beginning to loosen as you place the plunger over the drain and push and pull it up and down repeatedly. Do this a few times before it is completely cleared.
- If none of the abovementioned steps works, you can try using a plumber’s snake. Insert the snake into the clogged drain and turn it until you feel resistance; this will help break it up so it can be flushed away.
- If you still can’t clear it, it’s time that you hire a professional plumber for help.
How to Avoid a Clogged Drain
- The first step to avoiding it is to be proactive and clean it regularly.
- You can use a plunger or a snake to remove any blockages that you may find. Additionally, you must be careful of what you put down your drain.
- Avoid putting grease, hair, and food scraps, as these can easily lead to clogs.
- Finally, ensure that you have a good strainer in your sink so that any small particles are caught before they can go into the pipe.
If you want to keep your home sewer system running smoothly, here are some additional tips you can follow. First, don’t pour oil down your drains; these substances can solidify in your pipes and cause blockages. Second, run cold water for 30 seconds before and after using your garbage disposal to keep it clear of food particles. Finally, have your sewer system cleaned every 1-2 years to remove any built-up debris. Following these tips can ensure that your home sewer system runs smoothly for years to come!